Savage Range Systems will be closed for the Christmas Holidays from 23rd December through 1st January. We wish everyone Happy Holidays!
Bullet Traps and Clearing Stations
Snail® Systems Bullet Traps from Savage Arms have revolutionized the bullet trap industry. The bullet trap design incorporates low-angle ramps that deflect the bullet rather than smashing it, minimizing lead dust for a safer shooting environment. The bullet is deflected into a circular deceleration chamber where it slowly decelerates until stopping and dropping into a collection bin for optional recycling. No other bullet trap is as safe or environmentally sound. That's the Savage difference!
Forensic Buddy®
Forensic Buddy® developed as an efficient, non-destructive method of capturing bullets without the expense, mess and maintenance of water tanks, the Forensic Buddy meets all the demands of the forensic community. Extremely compact, economical and designed for single-shot use, either in the lab or as a portable unit, the Forensic Buddy contains a unique ballistic media that carefully collects specimens intact - so you can get a clean, accurate view of Land and Groove impressions.
If you need the best specimen for microscopic comparison, the Forensic Buddy has no equal.
The Forensic Buddy's special ballistic material, within an interior canister, stops the bullet with controlled deceleration then rests inside the canister. Just insert the muzzle of the handgun into the opening, aim straight and fire. Raise the back plate, remove and open the canister, pour the contents into the collection tray and recover the bullet. The media is reused and the plastic plug at the opposite end of the canister, where the bullet entered, is easily replaced when necessary.
The Lexan shell catcher protects the shooter from ejected casings. Just shoot straight into the opening for reliable results.
- Portable, less than 60 lbs.
- Safe capture of all handgun projectiles up to 454 Casul.
- Quick "shoot and collect" cycle of less than 60 seconds.
Check-it!™ Series
The Check-it!™ Series bullet trap was designed as a firearms "clearing station," to ensure no live ammunition is present before storing or cleaning a firearm. Each Check-it!™ bullet trap uses the Snail® System low angle ramps and circular deceleration chamber to safely stop bullets. The low angle ramps deflect the bullet into our round deceleration chamber where the bullet loses energy. The Check-it! series is uniquely engineered for shooters who want to keep a safe environment.
Freestanding Check-it!™
- Handles handguns, shotguns and rifles up to 3000FPE
- Safely captures accidental discharges
- Eliminates ricochet
- Fully welded one piece construction
- Captures bullets safely for recycling
- Low maintenance
Gunsmith Series - designed for feed and function testing
These are durable and easy to use stand alone units. The Gunsmith Series bullet traps use Wet Snail® technology to minimize airborne lead. The low angle ramps help deflect the bullet into our circular deceleration chamber where the bullet loses energy and drops into a collection tray. This uniquely engineered design is ideal for testing the functionality of a myriad of firearms and for anyone who is serious about eliminating an environmental health and safety problem.
GT Tabletop Gunsmith
- Low volume feed & function testing up to 4100FPE
- Specially designed for close quarters function testing
- Fully welded one piece construction
- Captures bullets safely for recycling
- Eliminates lead dust hazard
- Low maintenance
GD Gunsmith
- Moderate to high volume feed & function testing up to 8100FPE
- Specially designed for close quarters function testing
- Fully welded one piece construction
- Captures bullets safely for recycling
- Eliminates lead dust hazard
- Low maintenance
GHD Heavy Duty Gunsmith
- High volume feed & function testing up to 13000FPE
- Specially designed for close quarters function testing
- Fully welded one piece construction
- Captures bullets safely for recycling
- Eliminates lead dust hazard
- Low maintenance
Specialty Traps
The Box Trap Series bullet traps are designed for ballistics labs, firearms manufacturers and military facilities who are serious about eliminating environmental health and safety problems. The Boxtrap Series uses Wet Snail® Technology to minimize airborne lead. The low angle ramps deflect the bullet into our circular deceleration chamber where the bullet loses energy and drops into a collection tray.
R24 / R36 / R48
- Specifically designed for targeting, velocity and feed & function testing up to 8100FPE
- Eliminates lead dust hazard
- Fully welded one piece construction
- Low maintenance
- Captures bullets safely for recycling
- Self-contained lead-recovery tank
- Recirculation system equipped with a submersible pump
Proof and Function
The Proof & Function bullet trap, great for manufacturers who are serious about eliminating an environmental health and safety problem, uses Wet Snail® Technology to minimize airborne lead, low angle ramps deflect the bullet into our round deceleration chamber where the bullet loses energy and drops into a collection tray. It has a self-contained lead-recovery tank and impeller pump to recirculate fluid.
Custom designed to meet your testing and manufacturing requirements for proof loads, single shot, semi-auto, full auto (up to 4000 FPE) and large volume firing up to 13000FPE/.50BMG
P&F13000
- Specifically designed for testing and manufacturing requirements for proof loads, single shot and high volume firing up to 13000FPE
- Semi-auto and full auto ammo up to 4000 FPE
- Easily accommodates high volume/high caliber
- Eliminates lead dust hazard
- Fully welded one piece construction
- Low maintenance
- Captures bullets safely for recycling
- Self-contained lead-recovery tank
- Impeller pump to recirculate fluid
Please note for all bullet trap models:
Not for use with steel core (other than M855/SS-109) or armor piercing ammunition. Prices are subject to change without notice. Prices are FOB Factory. All shipping prices valid for domestic sales to contiguous USA only. Please contact Savage Range Systems for export shipping rates. Sizes and weights are approximate. As a part of Savage Range Systems, Inc. commitment to quality, we reserve the right to change materials and/or specifications without notice.
CHECK-IT is a trademark of Savage Range Systems
Products
Customer Service
About Us
© 2024. Savage Range Systems, Inc. All rights reserved.